T-Grid Suspension

This ceiling system has exposed T-Grid for lay-in ceiling tiles in a module of 600x600 mm

Item	Length	Height mm	Width	Thickness	Max. Loading/m2
Main Runner	10'&12'	32	24	0.3	8.45 kg/m2(M.R.at 1.2c/c)
Cross T	4'	25	24	0.3	12.05 kg/m2(M.R.at 0.6c/c
Cross T	2'	25	24	0.3
Wall Angle	10'	19	22	0.4

All system components are made of roll formed hot dipped galvanised steel with Zinc coating of not less than 120 gm/m2 & minimum tensile strength of 240 mpa.

This ceiling system is sleek & aesthetically pleasing, with an exposed T-Grid, only 15mm thick which is visible from below.

Item	Length	Height mm	Width	Thickness	Max. Loading/m2
Main Runner	12'	32	15	0.3	6.02(M.R.at 1.2 c/c
Cross T	4'	25	15	0.3	12.03(M.R. At 1.2 c/c
Cross T	2'	25	15	0.3
Wall Angle	10'	19	22	0.4

The exposed flange finish shall be prepared from galvanized steel of not less than 0.30 in off-white colour with coating thickness of 20 microns top coat & microns premier alkyd backer on back side. The main runner has fire notches to sustain grid system during fire.

This grid appears same as T-15 plain except for the black coloured concave part which brings a beautiful contrast effect to his grid making it look more elegant.

Item	Length	Height mm	Width	Thickness	Max. Loading/m2
Main Runner	12'	32'	15	0.3	6.02(M.R.at 1.2 c/c
Cross T	4'	25	15	0.3	12.3(at 1.2 c/c)
Cross T	2'	25	15	0.3
Wall Angle	10'	19	22	0.4

This is the most expensive grid system made totally from pre-coated one side black and one side white colour GI sheet having a inverted 'C' shaped botton which gives a nice silhouette effect when seen from below.

Item	Length	Height mm	Width	Thickness	Max. Loading/m2
Main Runner	10'	32'	15	0.3	8.4(M.R.at 1.2c/c)
Cross T	4'	25	15	0.3	18.0(M.R.at 1.2 c/c)
Cross T	2'	25	15	0.3
Wall Angle	10'	19	22	0.4